Bosch 0 986 612 997 Руководство по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Bosch 0 986 612 997. Bosch 0 986 612 997 44 страницы.

12. Pressing-in procedure

12.1 Preparation

The pressing-in procedure is described here by way of an example and applies similarly

for other pressing-in tasks.

Mount the component (e.g. flange) together with the part to

be pressed in (e.g. bushing, shaft sealing ring) and the

press-in tool on the force-measurement device

0 986 612 878.

Important!

Before switching on the manual indicator ensure that the force

pickup is connected to the manual indicator.

Switch on the manual indicator using the On/Off switch (1) on

top of the device.

Firstly, all the characters on the display are shown and then the

program version.

Ignore the displayed numerical value.

12.2 Sequence

Press the tare key [ T ] as often as it takes until the light emitting diode

[ Tara ] goes on and the display shows [ 000.0 ].

(000.0 = 000.0 kN)

Press the peak value key [ S ] once.

The light emitting diode [ MAX ] goes on.

The display must show [ 000.0 ].

If the display shows a value other than [ 000.0 ], press the mode key

[ MODE ] once.

This causes the peak value function memory to be deleted and [ 000.0 ] is

shown in the display.