DreamScreen 628-109 Series Руководство по установке - Страница 8
Просмотреть онлайн или скачать pdf Руководство по установке для Проекционный экран DreamScreen 628-109 Series. DreamScreen 628-109 Series 11 страниц.
Печатать страницуPAIRING THE RF REMOTE
The RF remote control has been set up at the factory and should work right away. If this is not the case, you
will need to use the learn function to program the remote. Remove the back cover of the remote control to
reveal the learning button as shown below. Connect the power cable and listen for 1 beep from the motor.
When you hear the beep, point the remote at the screen and press the learning button twice followed by the
up button. The remote is now paired to the screen.
RESETTING THE RF REMOTE CONTROL
To reset the RF remote control, open the back case of the RF Remote congtrol and follow the sequence of
pressing buttons: learn button->stop button->learn button. After 3 beeps, the code is deleted. Follow the
steps above to reconnect the remote.
8
UP
STOP
DOWN
LEARNING BUTTON