Andreani Group Cartridge Kit Инструкция по монтажу - Страница 4
Просмотреть онлайн или скачать pdf Инструкция по монтажу для Автомобильные аксессуары Andreani Group Cartridge Kit. Andreani Group Cartridge Kit 4 страницы.
Печатать страницуMake the oil level with tool cod. 1115 respecting the air-chamber
values given in the last page of this manual (Pic 13).
Insert spring and spacer into the fork (Pic 14).
pic 13
cod. 1219
pic 15
Mount the Cap, with the shaft completely down into the cartridge
and making a Phase* of 4 turns (Pic 15). Close the upper cap of
the fork.(Pic 16)
Compression 2 turns (from fully closed to open)
Rebound
Spring preload 4 turns (from fully open to close)
*Phase: With the cap still not inserted into the fork, open completely the
hydraulic adjuster and then turn it 4 times clockwise. This way when you insert
the cap into the cartridge it'll stop in the right position. Tighten it onto the car-
tridge and continue the procedure of installation
cod. 1115
Base Setup
2 turns (from fully closed to open)
pic 14
pic 16