Beckmann+Egle MD3060 Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Термометр Beckmann+Egle MD3060. Beckmann+Egle MD3060 16 страниц.

Печатать страницу

MD3150/3060

Set trigger condition or automatic switch-off of the

Mode 7:

device

Mode display

Pressing the minus key alternates between entry of 'trigger conditions' and 'automatic

switch-off' of the device.

Setting trigger condition: The large display shows 't r i g'

The 3 available trigger conditions are selected with the plus key:

- OFF

- top segment bar:

- bottom segment bar:

Setting the device for switch-off: The large display shows 'A o F F'

The device switch-off function can be selected with the plus key.

- OFF

- On

Manual save

Mode 8:

Mode display

The current temperature and the memory location number are displayed.

To carry out a series of measurements in manual save mode, a memory reset to

´000´ must at first be made with the minus key. Each press of the plus key saves the

current temperature value at the indicated memory location (small display).

If the measured value memory is reset but no manual saving carried out, the previous

series is not deleted, it will be deleted when a manual save is carried out.

More values can be added to an available series of measured temperature values in

manual save mode. For this, display the last-saved temperature value in the series in

mode 4 and then change to mode 8.

Pressing the plus key saves the current temperature value at the next memory

location.

Only MD3150 :

The current temperature value corresponds to the measuring channel selected in

mode 0. If 2-channel measurement mode is selected in mode 0, wait at least 2

seconds between 2 measurements in manual mode.

Please note:

Values entered in manual mode are only saved permanently when mode 8 is exited

and mode 0 adopted.

OFF,

Automatic switch-off function is disabled

Automatic switch-off function is enabled, i.e., if the device does not

detect activity within 4 minutes, it switches off automatically.

Memory location no.

Page 9

Small display

---

/ On,OFF

---

Interval measurement starts directly in mode 3.

Interval measurement starts if the temperature set

in mode 6 is exceeded.

Interval measurement starts if the temperature set

in mode 6 is undershot.

Small display

Large display

t r i g / A o F F

Large display

Current temperature

Internet: www.bue.de