Anova rcp6 Инструкции по сборке и использованию
Просмотреть онлайн или скачать pdf Инструкции по сборке и использованию для Внутренняя отделка Anova rcp6. Anova rcp6 4 страницы. Recycled plastic picnic table
Печатать страницуanovafurnishings.com
888.535.5005 tel
tAble components:
3 x Table Top Plank
Right Leg
2 x Seat Plank
Assembly HArdwAre:
22 x
Torx T30 X 3.0"
T25 X 3.0"
Washer Head Screw
Torx Head Screw
Assembly:
The assembly is a two-person operation.
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2. Assemble the Table over the shipping packaging or padded work area to avoid scratching the product.
Note: Before assembling the Nuts to the Bolts, it is recommended that a light oil or petroleum jelly be applied to the screw threads
3. Lay the three Table Top Planks out on the padded work area. The Table Top Planks can be distinguished from the Seat Planks
because the Table Top Planks have four predrilled through holes and four inner pilot holes while the Seat Planks have five
predrilled through holes. Arrange the Table Top planks with the four inner pilot holes facing up.
4. Locate the two Angle Brace Mounts. Use the T25
Torx Driver to start six T25 x 2.5" Torx Screws
into the predrilled holes in one of the Angle Brace
Mounts. Drive the Screws into the Brace Mount
Right Leg
until the points emerge on the other side. Place
the Angle Brace Mount over one of the inner rows
of predrilled pilot holes in the Table Top Planks,
Right Leg
aligning the points of the Torx Screws with the
pilot holes.
Use the T25 Torx Driver to drive the Screws into
the Table Top Planks until tight.
Repeat this step for the other Angle Brace Mount.
Assembly InstructIons
rcp6 Recycled Plastic Picnic Table
tools needed:
•
Ratchet with 9/16" Socket
•
T25 Torx Driver
•
T30 Torx Driver
•
Phillips Head Driver
•
Hammer
2 x Angle
2 x Leg Mount
Brace Mount
2 x Seat Stiffener
8 x
20 x
T25 X 2.5"
Torx Head Screw
2 x Angle
Brace
Left Leg
2 x Seat Support
2 x Left Leg
60 x
16 x
#10 X 3/4"
3/8-16 X 3.5"
Phillips Screw
Carriage Bolt
Left Leg
Left Leg
Angle Brace
Mounts
2 x Angle
2 x Support Bar
Support
2 x Right Leg
2 x Leg Mount Brace
16 x
16 x
3/8" Flat
3/8" Split
Washer
Washer
T25 x 2.5" Torx Screws
16 x
3/8-16
Hex Nut
Table Top
Planks