DSC HS2LCDWF v1.0 Руководство по установке - Страница 4
Просмотреть онлайн или скачать pdf Руководство по установке для Клавиатура DSC HS2LCDWF v1.0. DSC HS2LCDWF v1.0 9 страниц. Wireless keypad
3. Place the adaptor plug in the housing indentation, perpendicular to the key-
pad. Insert the adaptor plug firmly into the jack.
4. Pivot the adaptor plug downwards so that it fits flush with the housing.
Guide the AC wire along the channel provided in the keypad housing; the
wire will extend through the bottom of the housing.
5. Replace the keypad on the mounting plate/desk stand (in the latter case, a
further channel is provided in the bottom of the desk stand. Guide the AC
wire along this channel; the wire will extend through an opening in the back
of the stand).
6. Plug the adaptor into a wall outlet.
NOTE: Only use the power adaptor (9.0VDC, 1.25A, 11.25W) supplied with the kit.
CAUTION: The socket-outlet in which the direct plug-in adaptor is inserted must be
close to the keypad and easily accessible. Never obstruct the access to the socket out-
let. The plug of the adaptor serves as a means of disconnection from the supply mains.
Programming Labels
1. Use this section to assign a meaningful name (e.g., Front Door, Hallway,
etc.) to each zone.
2. Enter Keypad Programming by pressing
3. Enter the 3-digit section number for the label to be programmed.
4. Use the arrow keys (<>) to move the cursor underneath the letter to be
changed.
5. Press number key 1 through 9, corresponding to the letter you require. For
example, pressing number key 2 once will display the letter D; pressing it
again will display the letter E; pressing it a third time will display the letter
F, and so on.
[1] - A, B, C, 1 [4] - J, K, L, 4 [7] - S, T, U, 7 [0] - Space
[2] - D, E, F, 2 [5] - M, N, O, 5 [8] - V, W, X, 8 [*] - Select
[3] - G, H, I, 3 [6] - P, Q, R, 6 [9] - Y, Z, 9,0 [#] - Escape
6. When the required letter or number is displayed use the arrow keys (<>) to
scroll to the next letter.
7. When you are finished programming the Zone Label, press [
'Save' and press [
,
] again.
8. Repeat Steps 3 through 7 until all Labels are programmed.
ASCII Characters
Label Library
The Label Library is a database of words commonly used when programming labels.
Individual words can be combined as needed. e.g., Front + Door. Each line of the dis-
play supports a maximum of 14 characters. If a word will not fit on a line, scroll right
until the cursor appears at the first character of the second line then add the word.
To program a custom label using the Label Library:
[
,][8][Installer Code][,].
,
]. Scroll to
1. Enter keypad programming and select the label to change. e.g.,
[*][8][Installer Code][000][001] (to program the label for zone 01).
2. Press [*] to open the "Select Options" menu.
3. Press [*] again to select the "Words" option.
4. Enter the 3-digit number corresponding to a word (see Words table below)
or use the scroll keys [<][>] to view words in the library.
5. Press [*] to select the word.
6. To add another word, repeat the above procedure from step 2.
7. To add a space, press the right scroll key [>].
8. To clear characters, select "Clear to End" or "Clear Display" from the
"Select Options" menu.
9. To save the current label, press [*] to access the "Select Options" menu,
scroll left [<] to "Save" then press [*] again.
Broadcasting LCD Labels
If more than one LCD keypad is present on the system, labels programmed at
one keypad will be broadcast to all other LCD keypads right after the change is
confirmed.
Voice Prompt/Voice Chime
Voice Prompt Control (for wireless keypads only)
Menu: [*][6][access code] > Voice Control > Voice Prompt
Keypad: [*][6][access code]
This function is used to change the volume level of keypad voice prompts, for
example, "User arming in progress." The voice prompt speaks the zone labels
programmed for zone openings/closings. Use the scroll keys (LCD/touchscreen
keypads) or the [*] key (LED/ICON keypads) to increase and decrease volume
or enter a value from 00 to 15. Selecting 00 turns off keypad voice prompts.
Voice Chime Control
Menu: [*][6][access code] > > Voice Control > Chime Control
Keypad: [*][6][access code]
This function is used to change the keypad voice chime volume level. Use the
scroll keys (LCD/touchscreen keypads) or the [*] key (LED/ICON keypads) to
increase and decrease voice chime volume or enter a value from 00 to 15.
Selecting 00 turns off voice chime.
NOTE: This feature is only available when the voice prompt feature is enabled.
Changing Brightness/Contrast/Buzzer/
LCD Keypads
1. Press [,][6][Master Code].
2. Use the [<][>] keys to scroll to either Brightness/LED Bar Control, Contrast Con-
trol, Buzzer Control, or Voice Control.
3. Press [,] to select the setting you want to adjust.
4. a) Brightness/LED Bar Control: There are 15 backlighting levels. Use the [<][>]
keys to scroll to the desired level. Changing this level adjusts the LED bar accord-
ingly.
b) Contrast Control: There are 15 different display contrast levels. Use the [<][>]
keys to scroll to the desired contrast level.