Anslut 012894 Руководство по эксплуатации - Страница 15
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Вентилятор Anslut 012894. Anslut 012894 17 страниц. Pipe fan
Печатать страницу
TECHNICAL DATA
Voltage
Output
Duct
Air flow
Safety class
Protection rating
Operating temperature
Air temperature in ventilation system < 40°C
Noise level
Size
DESCRIPTION
• Axial fan made of plastic for supply and
exhaust air ventilation of small and
medium size homes heated during the
winter. The product is intended to be
connected to a Ø100 mm air duct.
• The product is intended for continuous
operation and permanent connection to
the mains. The air flow in the system must
correspond to the arrow on the fan
casing.
INSTALLATION
1.
Switch off the power supply.
FIG. 1
2.
Remove the cover and clip on the junction
box.
FIG. 2
3.
Connect the fan to the mains, replace the
clip and set a delay, if necessary.
FIG. 3
4.
Replace the cover on the junction box.
FIG. 4
5.
Connect the air ducts on each side of the
fan.
FIG. 5
6.
230 V ~ 50 Hz
14 W
DESIGNATIONS IN WIRING
Ø100
DIAGRAM
107 m
/hour
3
L
II
IPX4
N
1 to 45°C
QF Automatic fuse
S
56 dB
115 x Ø98 mm
MAINTENANCE
1.
2.
FIG. 6
3.
FIG. 7
4.
FIG. 8
5.
FIG. 9
6.
NOTE:
•
•
Connect the power supply.
Live wire
Neutral wire
External power switch
Switch off the power supply.
Release the air ducts.
Clean the product with a cloth moistened
with water and a mild detergent. Wipe
the surface dry.
Use a small brush or paintbrush to clean
the fan vanes and the inside of the fan.
Connect the air ducts to the fan.
Connect the power supply.
Make sure no water gets into the
electrical components.
Maintenance should be carried out at
least once every 6 months.
EN
15