Anslut 000-798 Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Наружное освещение Anslut 000-798. Anslut 000-798 9 страниц. Spotlight

Печатать страницу
EN

SAFETY INSTRUCTIONS

Read the operating instructions
carefully before use.
Save them for future reference.
• For outdoor use.
• The light source is not
replaceable.
• The electrical installation
must comply with local
regulations. Consult an
authorised electrician if in
doubt.
• Always disconnect the power
supply before installation,
connection and service.
• Never modify the lamp, this
could result in serious
personal injury and will
invalidate the warranty.
ELECTRICAL SAFETY
New installations and
extensions to existing
installations should always be
carried out by an authorised
electrician. If you have the
necessary experience and
knowledge (otherwise contact
electrician), you may replace
4
switches and power points,
fit plugs, extension cords
and light sockets. Incorrect
installation can result in fatal
injury and the risk of fire.

TECHNICAL DATA

Rated voltage
Output
Protection rating
Safety class

INSTALLATION

1.
Make sure the mains supply is
disconnected.
2.
Release the lamp bracket by unscrewing
the two screws that hold it.
FIG.
1
3.
Mark up on the wall where the lamp is to
be placed.
4.
Drill holes in the wall for the lamp bracket.
5.
Insert plugs in the drilled holes if
necessary.
6.
Insert the cord through the inlet in the
lamp bracket.
FIG.
2
7.
Fasten the lamp bracket on the wall with
two screws.
FIG.
3
8.
Connect the wires to the terminal block
on the lamp. Connect the brown wire to L,
and the blue wire to N.
FIG.
4
FIG.
5
230 V ~ 50 Hz
12 W
IP54
II