Anslut 411-142 Руководство по эксплуатации - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Нагреватель Anslut 411-142. Anslut 411-142 15 страниц.
Печатать страницу
ENGLISH
Read the operating instructions carefully before use.
Save them for future reference.
WARNING: The infrared heater does not have a thermostat to control the room temperature. If used in small
rooms where there are persons who cannot leave the room without assistance, it must therefore be kept under
constant supervision.
• The infrared heater must only be connected to an earthed socket 220–240 V, 50 Hz. Connection to other voltage
or types of sockets can result in personal injury and material damage, and will also invalidate the warranty.
• The infrared heater must only be used for its intended purpose and in accordance with these instructions, i.e. for
heating terraces and patios etc. The infrared heater must not be used to dry washing. The infrared heater is not
intended for commercial or professional use, or for heating of buildings, greenhouses, sheds or machine rooms.
• Handle the infrared heater with care and do not expose it to knocks or blows – short wave infrared bulbs are fragile.
• The infrared heater is a powerful source of heat and emits intense thermal radiation. For this reason avoid
exposing pets and people, especially infants, older persons or persons with diminished health to direct radiation.
• Do not place the infrared heater near furniture, curtains or other flammable materials. Do not place it near power
points or use it in damp environments, such as wet rooms or beside pools.
• Do not put the power cord under carpets or the like, or through doors and openings. Do not put the power cord
where it can be stood on, or where furniture can be put on it. Do not put the power cord round sharp corners, or
wind it up too tightly when not in use.
• Do not use the infrared heater outdoors in wet weather.
• Never use the infrared heater with a programming unit, timer or other device that switches it on automatically –
this can result in the risk of fire if the heater is covered over or in a bad position.
• Never cover the infrared heater.
• Protect the power cord from the hot parts on the infrared heater.
• Do not use extension cords unless this is necessary. Extension cords must be approved for 10 A. Always completely
unreel an extension cord.
• Never immerse the infrared heater in water or any other liquid.
• Some parts of the infrared heater get very hot. Do not touch hot parts – risk of burn injuries.
• Never poke your fingers or any objects into the inlet or outlet openings – risk of electric shock, fire
and/or personal injury.
• The heater element and front grille get very hot when the infrared heater is in use. Do not touch these parts
before the heater has cooled.
• Keep the heater under careful supervision when it is used by, or near children, or persons with functional
disorders. Keep small children under supervision to make sure they do not play with the heater.
• The infrared heater is not intended to be used by persons (children or adults) with any form of functional
disorders, or by persons who do not have sufficient experience or knowledge on how to use it, unless they have
received instructions concerning the use of the appliance by someone who is responsible for their safety. Do not
allow children to use, clean or maintain the heater without supervision.
• Switch off the infrared heater and unplug the plug from the power point before moving or cleaning it.
• Never attempt to dismantle or repair the heater yourself.
• Repairs of the heater, power cord and/or plug must only be carried out by qualified personnel. Any unauthorised
repairs or modification of the heater will void the warranty.
• Tilt protection; the infrared heater has a safety switch that automatically switches off the power if it tips over.
• Remove the plug from the power point if the heater tips over.
SAFETY INSTRUCTIONS
Operating instructions for
infrared heater
EN
13