DSC FSA-410BRT Инструкции по установке и эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Инструкции по установке и эксплуатации для Дымовая сигнализация DSC FSA-410BRT. DSC FSA-410BRT 4 страницы. Fsa-410 series smoke detector

Печатать страницу

DSC FSA-410BRT Инструкции по установке и эксплуатации

Smoke Detector Family

4-Wire Smoke Detector Family

FSA-410 XYYYY

L = Remote LED output

R = Auxiliary Form C Relay

S = Sounder

T = Fixed Temperature Heat Sensor

Model

FSA-410A, FSA-410B, FSA-410C

FSA-410AT, FSA-410BT, FSA-410CT

FSA-410AR, FSA-410BR, FSA-410CR

FSA-410ART, FSA-410BRT, FSA-410CRT YES

FSA-410AS, FSA-410BS, FSA-410CS

FSA-410AST, FSA-410BST, FSA-410CST YES

FSA-410ARS, FSA-410BRS, FSA-410CRS

FSA-410ARST, FSA-410BRST, FSA-

410CRST

FSA-410ALST, FSA-410BLST, FSA-

410CLST

FSA-410ALRST, FSA-410BLRST, FSA-

410ClRST

Specifications

Diameter (base) ........................................................... 5.8in (147mm)

Height (including base) ............................................. 2.077in (528mm)

Operating Temperature...................................... 32º-100ºF (0º-37.8ºC)

Humidity............................................... 5%-93% RH, non-condensing

Operating Voltage Range.....................................................10-30 V

Maximum Standby Current................................... 20µ µ A@12 or 24V

Maximum Alarm Current .................................................25mA-90mA

Smoke Sensitivity ULC................................. 2% ± 0.5%/ft obscuration

Smoke Sensitivity UL ................................... 3% ± 0.8%/ft obscuration

Heat Alarm ..................................................................... 135ºF (57ºC)

Sounder Alarm Pattern ULC..................................... Continuous Beeps

Sounder Alarm Pattern UL ....................... Evacuation Temporal Pattern

Minimum Remote LED Resistance:

12V system........................................................................ 500 Ohm

24V system...................................................................... 1000 Ohm

Maximum Remote LED output (if equipped)............................... 25mA

Auxiliary Relay Rating (Form C Relay) ................2A @ 30V

Alarm Relay Rating (Form A Relay) .................2.0A @ 30V

A = ULC

{

B = UL

C = EU

Aux

LED

Heat Sounder

Relay

Output

YES

Limited Warranty

Digital Security Controls Ltd. warrants that for a period of twelve months from the date of pur-

chase, the product shall be free of defects in materials and workmanship under normal use and

that in fulfillment of any breach of such warranty, Digital Security Controls Ltd. shall, at its

option, repair or replace the defective equipment upon return of the equipment to its repair depot.

This warranty applies only to defects in parts and workmanship and not to damage incurred in

shipping or handling, or damage due to causes beyond the control of Digital Security Controls

Ltd. such as lightning, excessive voltage, mechanical shock, water damage, or damage arising

out of abuse, alteration or improper application of the equipment.

The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any

and all other warranties, whether expressed or implied and of all other obligations or liabilities on

the part of Digital Security Controls Ltd. Digital Security Controls Ltd. neither assumes respon-

sibility, nor authorizes any other person purporting to act on its behalf to modify or to change this

warranty, nor to assume for it any other warranty or liability concerning this product.

In no event shall Digital Security Controls Ltd. be liable for any direct, indirect or consequential

damages, loss of anticipated profits, loss of time or any other losses incurred by the buyer in con-

nection with the purchase, installation or operation or failure of this product.

Smoke Detectors

Smoke detectors that are a part of this system may not properly alert occupants of a fire for a num-

Max.

ber of reasons, some of which follow. The smoke detectors may have been improperly installed or

Alarm

positioned. Smoke may not be able to reach the smoke detectors, such as when the fire is in a chim-

Current

ney, walls or roofs, or on the other side of closed doors. Smoke detectors may not detect smoke

Draw

from fires on another level of the residence or building.

Every fire is different in the amount of smoke produced and the rate of burning. Smoke detectors

25mA

cannot sense all types of fires equally well. Smoke detectors may not provide timely warning of

fires caused by carelessness or safety hazards such as smoking in bed, violent explosions, escaping

25mA

gas, improper storage of flammable materials, overloaded electrical circuits, children playing with

matches or arson. Even if the smoke detector operates as intended, there may be circumstances

40mA

when there is insufficient warning to allow all occupants to escape in time to avoid injury or death.

40mA

WARNING: Digital Security Controls Ltd. recommends that the entire system be completely

tested on a regular basis. However, despite frequent testing, and due to, but not limited to,

75mA

criminal tampering or electrical disruption, it is possible for this product to fail to perform as

expected.

75mA

Important Information: Changes or modifications not expressly approved by Digital Security

90mA

Controls Ltd. could void the user's authority to operate this equipment.

90mA

FCC Compliance Statement

CAUTION: Changes or modifications not expressly approved by DSC could void your author-

ity to use this equipment.

75mA

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

90mA

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful inter-

ference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Re-orient the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/television technician for help.

The user may find the following booklet prepared by the FCC useful: "How to Identify and

Resolve Radio/Television Interference Problems". This booklet is available from the U.S. Gov-

ernment Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4.

Industry Canada Compliance Statement

This Class B digital apparatus meets all requirements of the Canadian interference-causing

equipment regulations.

Cet appareil numérique de la Classe B respecte toutes les exigences de règlement sur le matériel

brouilleur du Canada.

(Resistive)

Toronto, Canada • www.dsc.com

Technical Support: 1-800-387-3630 (Canada & U.S.) or 905-760-3036

Printed in Canada

2 9 0 0 6 0 1 9 R0 0 3