Airton 409709 Руководство по установке и эксплуатации - Страница 11
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Кондиционер Airton 409709. Airton 409709 17 страниц. Monobloc mobile cold & hot air conditioner
Press the fan speed button on the remote control panel
FAN/FAN MODE
Press the MODE button on the control panel remote control to select FAN mode.
The indicator lights up on the air conditioner display panel.
Press the fan speed button on the control panel
remote control
NOTE: In ventilation mode, the temperature cannot be adjusted.
DEHUMIDIFICATION / DRY MODE
Press the MODE button on the control panel or remote control to select DRY mode.
lights up on the air conditioner display.
Warning light
Beforehand, remove the cap and drain plug on the back of
the air conditioner for dehumidifying water.
Insert the drain hose, put the other end of the hose into
a water tank
Once the dehumidification mode is activated, if the room
temperature ≥ 15°C (59°F), the compressor will start. Then
when the ambient temperature is ≤ 13°C (55°F), the
compressor will turn off. Finally, when the temperature in
the room rises and is ≥ 15, the compressor will restart (in
order to protect the compressor, it will be restarted 3min.
later).
NOTE: In dehumidification mode, the fan runs at low speed and the airflow cannot be
adjusted.
The temperature cannot be adjusted.
to choose the desired heating rate: High/Medium or Low.
to choose the desired ventilation rate: High/Medium or Low.
or the
or the
11