Auber Instruments WS-1211GPH Краткое руководство - Страница 3
Просмотреть онлайн или скачать pdf Краткое руководство для Контроллер температуры Auber Instruments WS-1211GPH. Auber Instruments WS-1211GPH 12 страниц. Programmable precision pid temperature controller
Печатать страницу
(1) Parameter Window (LED) - For displaying temperature values and controller's system
parameters.
(2) Output status indicator - In normal mode, this LED indicates the heater status. When it is on
(lit), the heater is powered. When it is off, the heater power is off. When it is flashing, it means the
heater is on and off intermittently to reduce the power output. It should be synchronized with the
power light on the cooking device.
(3) SET Key - For showing current temperature settings, entering parameters setting mode and
confirming various actions taken.
(4) "+" Key - To increase the value at parameter setting mode; toggle LED display between the
current temperature and the current step number at normal operating mode.
(5) "-" Key - To decrease the value at parameter setting mode.
(6) Time Key - To toggle the LED display between the current temperature and the total running
time at the normal operating mode.
(7) Alarm indicator - Lit when the alarm is on.
(8) Timer status indicator – Lit when Time key is pressed.
(9) Editing indicator – A dot at the lower right corner. When the dot flashing, the value is
editable; pressing the "+" or "-" key to change the value.
The layout of the controller back panel is shown in Figure 2.
Figure 2. Back Panel.
2. Connecting the controller
There are two ways to power up the controller and smoker.
3