AODELAN E4 Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Передатчик AODELAN E4. AODELAN E4 16 страниц. Wireless flash trigger
Печатать страницу
II. Getting Started
Installing the batteries
1.
Open the battery compartment cover from the back of E4.
2.
Install 2 AAA batteries in accordance with the illustrated direction inside the battery compartment.
3.
Close the battery compartment cover in place.
Precautions for Use
The battery level
When the battery is low,
Turning E4 on/off
1.
Turn on: Press the Power Button [11] to turn on the E4, the Display [1] lights up and contents are displayed.
2.
Turn off: Press and hold the Power Button [11] until the Display [1] lights off.
Connecting to the camera
1.
Turn off the camera and E4.
2.
Slide the Hot Shoe Mounting Foot [15] of the E4 into the camera's hot shoe mount.
3.
Lock the E4 by sliding the Mounting Foot Lock Lever [13] to right until the lock lever clicks in place.
4.
Turn on the camera and E4 and set the shooting mode of the camera to Manual (recommended).
5.
To detach E4, press the lock-release button on the Mounting Foot Lock Lever [13] while slide the lock lever
all the way back to the left, then slide the E4 out of camera's hot shoe mount.
is shown in the upper right corner of the Display [1].
or
will be shown in the Display [1], replace the batteries with new ones.