AudioControl LCQ-1 Руководство по быстрой установке

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Медиаконвертер AudioControl LCQ-1. AudioControl LCQ-1 10 страниц. Six channel line output converter with multi-channel equalization and accubass

Печатать страницу

Six Channel Line Output Converter

with Multi-Channel Equalization and AccuBASS™

The LCQ-1 is your gateway to amazing sound from a factory head unit. It

is a compact, six-channel, high-performance, OEM

line output converter with independent multi-

channel equalizers to custom tune the system.

AudioControl's patent pending AccuBASS™

Key Features of The LCQ-1

Here are some of the cool things that your LCQ-1 does:

• Independent Front, Rear, and Subwoofer equalizers let you custom tune

your system

• AccuBASS™ bass compensation, so you can correct for the factory bass

roll off, Patent Pending

• GTO™ - signal-sensing inputs to turn the LCQ-1 on automatically

• Channel summing lets you eliminate any factory-installed active

crossovers

• Active speaker-level inputs accept high power factory ampliﬁer outputs

• AutoMode Inputs turn 2 inputs into 3 outputs

• Compact size for quick, easy installation

• Input for optional ACR-2 remote mounted bass level control

• Bulletproof 5 year warranty (When installed by an authorized

AudioControl dealer)

Want to know more? See the "Awesome Information" section, page 8

...it's all there!

Making Good Sound Better

compensation corrects for the factory bass

roll-off present in many of today's cars.

In short; the LCQ-1 can make every car

sound amazing.

If you want even more, add the

optional dash mounted level control

(ACR-2) which allows control of the

subwoofer output. The ACR-2 will

also operate as an in/out switch for the

EQ section. Very handy addition!

Quick Install Guide

Since some of you will want to install your LCQ-1 on your own we offer a

few reminders in the following short section to speed up your installation of

the: You should also refer to diagrams on page 9 and 10 as guidelines.

Physically mount the LCQ-1 in a location that keeps it away from soda

spills, food crumbs, and curious ﬁngers. Select a location that allows you ac-

cess to the top panel equalization controls.

The LCQ-1 needs to be installed in the signal path between your OEM

source unit (or factory ampliﬁer) and after-market ampliﬁer(s) and/or

processor(s). Do not connect the LCQ-1 between the factory head unit and

the factory ampliﬁer. Locate the ampliﬁed speaker wires that are coming from

your factory source unit and/or ampliﬁer and connect them to the speaker-level

inputs on your LCQ-1. In many cases you can ﬁnd factory speaker leads in the

rear of the vehicle or at the factory ampliﬁer that are easy to access.

Note: If your source unit has front, rear, and subwoofer speaker-level out-

puts, connect them to the three sets of inputs on your LCQ-1. If the source unit

only has front and rear outputs, the Auto Mode circuitry in your LCQ-1 auto-

matically routes the Channel 2 input channels to the (Channel 3) subwoofer

channels.

Use RCA connecting cables to connect the RCA outputs of the

LCQ-1 to your after market ampliﬁer(s). If this is not obvious to you, quickly

pack up your LCQ-1 and run to your nearest authorized AudioControl dealer to

have them perform the installation. You will thank us later.

Connect +12 power, and ground. Note: The LCQ-1 has a 12-volt trigger

input but normally you will just let the GTO turn on circuit take care of that by

itself.

Connect your ampliﬁer trigger input to the 12-volt trigger output of the LCQ-1.

Turn your amp gains fully down before turning on the system.

Turn on the system and level match your LCQ-1 to your source unit, signal

processor and ampliﬁers. For more help see our technical videos at

http://www.audiocontrol.com/t34/Mobile-Audio.html

Set your equalization controls so the system sounds amazing. See page 9

for more details.

If you have your authorized AudioControl dealer install your LCQ-1, we

will extend the normal one-year warranty to a full ﬁve years. AudioControl

products are, by nature, more technical than many others and we spend a good

deal of time training our dealers and installers so we know our products will

be installed correctly. We do this so you will get the best possible results from

your AudioControl purchases. For the best results this tuning should be done by

page 1