Audiovox 128-6210A Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Автомобильный приемник Audiovox 128-6210A. Audiovox 128-6210A 12 страниц. Satellite digital audio control and receiver system
Печатать страницу
DIRECTLY ACCESSING A CHANNEL
To directly access a specific channel, proceed as follows:
1.
Press the Shift (SFT) button; the channel number (CH 020)
flashes for 5 seconds in reverse image format.
2.
While the channel number is flashing for the 5-second period,
use the number buttons on the keypad and enter the desired
channel.
3.
The selected channel number will flash for 5 seconds and then
remain steady.
NOTE:
If the selected channel is not available, (---) will appear
on the display and the system will remain tuned to the
previous channel.
1
2
4
5
20 on 20
The Techs
7
8
Oh Baby Oh Baby
---------------------------------
0
CH 020
Hits
AUDIO OX
SFT
CHANNEL NUMBER
FLASHES
PRESETTING A DESIRED CHANNEL
Up to 10 channels can be preset on your SCU for rapid and easy ac-
cess. Channel preset is accomplished as follows:
1.
Select the desired channel you wish to save in memory by using
the directional buttons, direct access method, or category se-
lect tuning method.
2.
With the desired channel accessed and displayed, press and
hold any one of the numbered keypad buttons for more than 1
second.
PRESS KEYPAD BUTTONS
3
TO SELECT DESIRED
6
CHANNEL
9
PRESS THE SHIFT
BUTTON
3.
Note that the preset number appears in reverse image format in
the lower right-hand corner of the display on the same line as
the channel number.
4.
Repeat the procedure in steps 2 and 3 to save nine other
desirable channels for quick access.
1
4
The Joint
Khrisp
7
Oh Baby Oh Baby
-----------------------------------
6
101
World
CH
AUDIO OX
THE PRESET MEMORY
SELECT THE
LOCATION APPEARS
DESIRED CHANNEL
HERE
SPECIAL FUNCTIONS USING THE SHIFT BUTTON
There are a number of user preference functions that can be adjusted
simply by using the Shift (SFT) button with a specific number code.
These functions are explained in the following paragraphs.
In general, a shift/code is entered in the following manner:
0
SFT
9
SFT
(SFT) represents Shift button
activation and XX represents the
specific function code. (The 4-digit
code always starts with 09.)
7
PRESS AND HOLD
2
3
ANY NUMBER BUTTON
5
6
(0-9) TO COMMIT THE
8
9
CHANNEL TO PRESET
0
MEMORY
SFT
, where:
128-6210A
7 of 12