Apogee Instruments SP-230-SS Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы Apogee Instruments SP-230-SS. Apogee Instruments SP-230-SS 20 страниц. Pyranometer

Apogee Instruments SP-230-SS Руководство пользователя

SPECIFICATIONS

ISO 9060:2018
Heater
Sensitivity
Calibration Factor
(Reciprocal of
Sensitivity)
Calibration Uncertainty
Calibrated Output
Range
Measurement
Repeatability
Long-term Drift
(Non-stability)
Non-linearity
Response Time
Field of View
Spectral Range
Directional (Cosine)
Response
Temperature Response
Operating Environment
Dimensions
Mass
Cable
Calibration Traceability
Apogee Instruments SP series pyranometers are calibrated through side-by-side comparison to the mean of four
Apogee model SP-110 transfer standard pyranometers (shortwave radiation reference) under high intensity
discharge metal halide lamps. The transfer standard pyranometers are calibrated through side-by-side comparison
to the mean of at least two ISO-classified reference pyranometers under sunlight (clear sky conditions) in Logan,
Utah. Each of four ISO-classified reference pyranometers are recalibrated on an alternating year schedule (two
instruments each year) at the National Renewable Energy Laboratory (NREL) in Golden, Colorado. NREL reference
standards are calibrated to the World Radiometric Reference (WRR) in Davos, Switzerland.
SP-110-SS
Class C (previously known as second class)
N/A
± 5 % (see Calibration Traceability below)
Less than 1 % (up to 2000 W m
360 to 1120 nm (wavelengths where response is 10 % of maximum;
± 5 % at 75° zenith angle (see Cosine Response below)
0.04 ± 0.04 % per C (see Temperature Response below)
-40 to 70 C; 0 to 100 % relative humidity; can be submerged in water up to 30 m
5 m of two conductor, shielded, twisted-pair wire; TPR jacket (high water resistance,
high UV stability, flexibility in cold conditions); pigtail lead wires; stainless steel (316),
M8 connector located 25 cm from sensor head
780 Ω, 15.4 mA current draw and 185 mW
power requirement at 12 V DC
-2
0.2 mV per W m
-2
5 W m
per mV
0 to 400 mV
Less than 1 %
Less than 2 % per year
-2
)
Less than 1 % (up to 1750 W m
Less than 1 ms
180°
see Spectral Response below)
24 mm diameter, 33 mm height
90 g (with 5 m of lead wire)
SP-230-SS
-2
)