Addvent AVAC9000W Инструкции по установке и руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Инструкции по установке и руководство пользователя для Кондиционер Addvent AVAC9000W. Addvent AVAC9000W 9 страниц.

Печатать страницу
AVAC9000W[15]instructions

Operation

Power Control
The power control turns the unit on and
off.

Warning Light

Condensed water may accumulate in the
unit. If the internal tank becomes full, the
Warning Light will shine and the unit will
not operate until the unit has been
drained.

Mode Control

The Mode Control has 3 settings:
• Cool • Dehumidify • Fan
The settings are adjusted with Mode
Control button. A light will indicate
which setting is currently being used.
• Cooling Mode
During the cooling mode the air is
cooled and hot air is exhausted to the
outside through the exhaust tube.
Adjust fan speed and air temperature
to suit your desired comfort level.
Note : The air exchange hoses must
vent outside the room when using
cool mode.
• Dehumidify Mode
Air is dehumidified as it passes
through the unit, without being in full
cooling mode. If room temperature is
>25 degree Celsius, fan speed can be
adjusted; otherwise fan speed is fixed
9/4/15
09:43
Page 4

Control Panel

Fan Mode
Fan Speed Control
Timer
Timer / Temp set controls
4
to "low". Note : If the unit is to be
used as a dehumidifier, do not
connect the exhaust hose let the
warm air return to the room.
Continuous drainage is then
necessary.
Air is circulated throughout the room
with no cooling.
Note: unit does not need to be vented in
Fan mode
The Fan Speed Control has 3 settings:
High, Medium, and Low.
Auto turn off :With machine in running
mode, press timer button to select
number of hours you would like the unit
to run in air conditioning mode until it
automatically shuts off.
Auto turn on : With machine in stand by
mode, press timer button to select
number of hours until you would like the
unit to automatically start running in air
conditioning mode.
• Used for adjusting the timer and
thermostat.
• The default display is room
temperature.