Addvent AVCH60 Инструкции по установке и руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Инструкции по установке и руководство пользователя для Вентиляционная вытяжка Addvent AVCH60. Addvent AVCH60 4 страницы. Cooker hood

Печатать страницу

The AVCH60 is a 60cm 'domestic-only' Stainless Steel cooker hood

for installation over an electric or gas hob. The hood can be used for

extraction to the outside of a building or for recirculation. Equipped

with a powerful 3-speed electric motor, twin 12v lights and non stick

grease filter, it quietly produces strong suction and is easy to clean.

Safety Warning

The cooker hood is for domestic use only and is not suitable for

barbecues or other commercial purposes.

The cooker hood should only be operated by a responsible adult.

This appliance should be installed by a competent person, if

unsure about installation get a qualiﬁed electrician to install the

appliance.

The cooker hood and ﬁlter mesh should be cleaned regularly to

maintain efficient working.

Before cleaning, please switch the power off at the main supply.

Clean the cooker hood according to the instructions.

If there is any fault with the appliance, please call Addvent on

0117 923 9375 for advice.

Before installation, unpack hood

and check contents.

You should receive:

Hood

Decorative Chimney (bottom and top)

Hood Mounting Bracket

Chimney Mounting Bracket

Discharge Collar

Installation Manual

2m x 150mm diameter Flexible Ducting

Speciﬁcation

Model AVCH60: Ratings: 220-240V ~50Hz; Motor input: 125W;

Input: 205W; Air flow: 500m

/h; Lamps: ≤2x40W

Appliance Dimensions

Operation Modes

This cooker hood is designed to be installed for air extraction or air re-circulation.

For air re-circulation charcoal filters are required. For air extraction, use the

150mm diameter flexible ducting provided. Please call Addvent for advice on 0117 923

5375.

Air Extraction:

The air is drawn into the appliance and cleaned by the grease filters and directed

outside.

If the on-site ventilation system does not have a non-return flap, the non-return flap

supplied with the appliance must be fitted in the exhaust socket in the motor unit

(see installation instructions).

Having a non-return flap fitted to the ducting ensures that air, once ducted to the

outside, cannot get back into the room again.

The flap remains closed when the cooker hood is switched off.

When the cooker hood is switched on, the non-return flap opens for the cooking

vapours to be ducted away.

Air Recirculation:

The air is drawn in and cleaned first by the grease filters and then by a charcoal

filter. The cleaned air is then re-circulated back into the kitchen through grilles in

the top of the cooker hood extension piece.

Before using the cooker hood in recirculation mode, ensure that the charcoal filter

is in place.

Before Installation

Before installation, please ensure the area is clean.

After installation, make sure that the extractor is level.

It is prohibited to fit a cooker hood over a solid fuel stove.

All materials used in the fitment of this product must be non-flammable.

This appliance must not be connected to a chimney or vent flue which is in use.

Professional advice should be sought if ducting this appliance into a chimney or

vent flue which is no longer in use.

This appliance should not be connected to ducting which ventilates rooms with

fireplaces.