Datamax A Class Mark II Руководство по установке - Страница 12

Просмотреть онлайн или скачать pdf Руководство по установке для Фреза Datamax A Class Mark II. Datamax A Class Mark II 14 страниц. Cutter option

3) Remove the two Cover Screws from the Cutter

Assembly and then remove the Cover.

4) Using compressed air, remove any debris trapped

inside the mechanism. Using a Cotton Swab

dampened with alcohol, wipe the Fixed Blade

clean, and then slightly raise the Sled and wipe

the Moveable Blade clean.

Note: For cleaning heavy deposits from the blades, WD-40

adhesive remover) can be substituted for isopropyl alcohol – provided this substitute is

carefully and sparingly applied using a cotton swab. Never spray WD-40

substance) directly onto the assembly; severe damage can result.

5) While the Sled is raised, check the Pad Wick for

sufficient lubrication –– if dry, replace the Pad

Wick.

6) Allow both blades to dry. Replace the Cutter Cover, and then secure it to the Cutter Assembly

using the two Cover Screws.

7) Place the Cutter Assembly onto the Mount. Then, replace the Vertical Mounting Screw and the

Thumbscrew; tighten both to secure the Cutter Assembly to the printer.

8) Reconnect the Cutter Cable.

9) Reload Media and close the Access Cover to complete the procedure.

Cover

Screws

Moveable

Blade

Fixed

Blade

(or another non-damaging

Cutter Cover

Cutter Assembly

Sled

Cotton

Swab

(or a similar

Pad Wick