Datamax A Class Mark II Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Фреза Datamax A Class Mark II. Datamax A Class Mark II 14 страниц. Cutter option

Overview

This document describes the contents and installation of the A-Class Mark II Cutter option. After verifying

the kit's contents and the tools needed, follow the steps to install and use the option. A maintenance

procedure and a parts list are also included, so keep this documentation for future reference.

Only qualified service technicians should install this option. For safety and to avoid

equipment damage, always turn 'Off' power and unplug the power cord before starting

CAUTION

this installation and when performing service.

Contents of the Cutter Kit

This kit contains the following items:

Mounting Bracket

Cutter CCA

Lock Washer (2)

Jack Screw (2)

Control Cable

Interface Cable

Screw (2), Flat Head M4 X 6

Cutter Assembly

Flat Washer (5)

10 Screw (4), M4 X 20

Screw, M4 X 10

12 Warning Label

Tools Required

To install this option, you will need a 3mm hex wrench, a 3/16-inch open-end wrench, a standard

screwdriver and a Philips screwdriver.

Wear a wrist strap and follow standard ESD prevention measures during this procedure.

CAUTION

WARNING