ADE M400020 Series Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Весы ADE M400020 Series. ADE M400020 Series 16 страниц. Class iii approved scales electronic chair scales

Печатать страницу

ADE M400020 Series Руководство по эксплуатации

–

Do not operate the unit in hazardous or unstable conditions.

–

Do not submerge the unit in water or other liquids.

–

All actions/operations described in this operating manual may only be carried out by trained and by ADE

authorised professional personnel.

–

Using accessories that do not meet the safety requirements of this unit can lead to a reduction in the

safety level of the entire system.

–

Set up the unit as far away as possible from equipment that generates electromagnetic or other interfer-

ence.

–

Only ADE power adapters are allowed to use to avoid any risk of fire and electric shock.

–

Clean with a dry cloth; do not use any sharp cleaning materials.

Hazard-free operation is no longer guaranteed:

–

If the power unit exhibits visible damage.

–

If the power unit is no longer working.

–

After longer periods of storage in damp rooms.

Inform your service partner in such cases for your own safety.

Connecting additional devices

Connection of printer, PC or remote-display will be done with the RS-232 interface. For connection of addi-

tional devices kindly ask your local representative or authorized ADE dealer for further instructions.

Housing and connections

The mains adapter connection, serial port connection and connection to the weighing cell are located on the

back of the ADE indicator housing. The set-up switch to start configuration mode is recessed underneath the

housing. It is protected by a cover plate and secured by a screw (not shown in Fig. 2-1).

Do not use the set-up button as otherwise calibration will be lost. This procedure is only al-

lowed to be done by authorized service personnel appointed by ADE (GmbH & Co.). Any unau-

thorized manipulations made to the configuration mode will affect the warranty agreement.

Modes of operation

 Weighing mode

The "weighing mode" is of course the standard mode of your scale. After initial configuration and sealing (by

attaching a calibration sticker to the back of the unit), the ADE-scale can only be operated in this mode.

 Setting mode

Date, time and consecutive numbers for print commands are being set in this mode. To start setting mode,

hold the GROSS/NET key pressed until TIME appears on the display.

 Configuration mode (set-up mode)

The values for different parameters including the calibration could be set in the configuration mode. This func-

tion is reserved for authorized service personnel only.

M400020-210322-Rev007-UM-e