ADE M40010 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Весы ADE M40010. ADE M40010 12 страниц. Electronic chair scale, class iii approved,

Печатать страницу

Body Mass Index (BMI)

The Body Mass Index is the ration between height and weight squared. The BMI is meanwhile

accepted world-wide – also by WHO (World Health Organization) – helping to evaluate the state of

nutrition as well as the state of health of a person. The result is a tolerance value.

As the exact body length is one essential value we recommend to measure the patient by using

together with your ADE scale the height measuring rod model MZ 10019.

Start the scale as already described and take the weight. Then press the BMI key and use the

numeric key to indicate the height of the patient in cm. Confirm by using the ENTER key. The BMI is

calculated and displayed.

Evaluation of the Body Mass Index

BMI below 18

•

The patient is not showing enough weight. Control nutrition to put on weight.

BMI between 18 and 20

•

The patient is slightly under weighed. If he feels well there is no need for a change..

BMI between 20 and 25

•

The patient is in the range of normal weight.

BMI between 25 and 30

•

The patient is slightly overweighed. A reduction of weight is indicated or, is necessary if the

state of health is already affected (e.g. diabetes, high end blood pressure, heart diseases).

BMI over 30

•

Reduction of weight is imperative. Also to visit a doctor is highly recommended.

Tare functions

The SEMI AUTO TARE key is used for taring objects which are weighed together with the patient

(e.g.cloths, shoes or any other objects). These objects need to be weighed first. After the weight is

indicated on the display enter he Semi Auto Tare key and the display comes back to zero (0.00´).

The weight of the previously weighed objects will now automatically be deducted when weighing the

patient and the value diplayed is only the weight of the patient.

By using the Preset TARE key any requested value can be put under TARE by manually keying in

this selected tare value using the numeric keys. Confirmation is done by the ENTER key and can be

re-activated whenever requested. This function is used if you know the value of the weight to be tared

is a fixed and not a variable one.

Set zero

By using the Zero key eventual irregularities occurred after start up the scale can be compensated by

setting the display back to zero.

Hold function

Press the Hold key in case of unstable readout which might occur if for example the patient is not able

to stand still on the platform. The scale will hold the result displayed. After scale has been unloaded,

the result value is still readable and can be noted.

050100-Rev000-M40010