ADE M70612 Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Весы ADE M70612. ADE M70612 7 страниц. Electronic lifter scale

Tare Function

Use the TARE key when the patient is weighed with any other equipment (such as carrying equipment,

belts, suspension yoke etc.). Weight the equipment first. After the weight is indicated press Tare key to

adjust the scale back to zero. The weight of the stored value will be deducted for all future weighing

procedures unless the tare function is used another time.

The weight displayed in the patient's net weight.

GROSS/NET function

Using the GROSS/NET key you can jump between gross and net subject to a tare value has been

stored.

Pressing the Zero key you may eliminate minor weighing irregularities which may occur after starting

the scale and the scale will be set to zero.

Printing function

In case a printer has been connected and the printing menu has been activated the<PRINT> function is

sending the weight result to the printer. In case no printer has been connected the function is

interrrupted after 10 seconds.

„Lifeweight" - function

The f- key is manually activated and deactivated dependant from the requirement to weigh extremely

restless patients and getting a reliable result. In case the Lifeweight function is activated the scale

identifies all major movements caused by the patient during weighing in either direction and is

automatically cutting these irregularities off. Different automatical measurements done during weighing

the final weight of the patient displayed is most accurate.

Display symbols

NET

(Motion)

(above limit)

(below limit)

(Battery)

060100-Rev000-M70612

Scale is under tare

Scale is in motion

The limit has been exceeded

Off limit

Batteries low – insert fresh ones