AUSTRALIAN MADE GREAT MATE Инструкции по установке и настройке - Страница 9

Просмотреть онлайн или скачать pdf Инструкции по установке и настройке для Двигатель AUSTRALIAN MADE GREAT MATE. AUSTRALIAN MADE GREAT MATE 20 страниц. Double swing gate motor kit

Печатать страницу

The gate motor should be mounted on a solid post or pillar about 50mm — 100mm from the gate

hinges and the motor shaft should be approximately at the same level as the bottom rail of the

gate

Place the complete motors on a work bench. Remove the black steel motor covers. Take note or

a photo detailing how the gate motor is assembled and the circuit board wiring for possible future

reference.

Separate the drive assembly and circuit board from the gate motor mounting cradle by

undoing the 4 nuts underneath the motor holding the drive assembly in the mounting cradle and

remove the drive assembly and circuit board from the gate motor mounting cradle. Take care not

to damage the circuit board or allow it to get wet.

Motor Cover

Drive Arm

Undo the 4 nuts

underneath the motor.

GATE MOTOR

INSTALLATION AND SET UP

INSTRUCTIONS

Mounting the Gate Motor

Mounting Cradle

Undo 4 nuts

underneath gate

motor to remove

Motor assembly

Master Motor Assembly with

Circuit Board and Cover

Mounting

Cradle

Drive Assembly

with Circuit Board

(Master Motor)