AUSTRIAN GAMING INDUSTRIES NOVOSUPERVISION FV-626 CF2 Руководство - Страница 15
Просмотреть онлайн или скачать pdf Руководство для Аксессуары для видеоигр AUSTRIAN GAMING INDUSTRIES NOVOSUPERVISION FV-626 CF2. AUSTRIAN GAMING INDUSTRIES NOVOSUPERVISION FV-626 CF2 20 страниц. Kernel 8.2
Печатать страницу3
Power up
3.1
Inspection (damages caused by transport)
1)
Remove the shipping carton and the material used to secure machine components during transport
(necessary only for some types of cabinet).
2)
Should any damages caused by transport have occurred on the exterior, report them immediately to the
sender and have them confirmed by the same.
3.2
Installation instructions
It must be ensured that the machine is operated in an upright position. Further, the machine has to be
screwed down tightly to the base by means of the mounting material included in the delivery. The minimum
distance between two machines should be 21 cm to avoid possible damage when opening the main door.
The minimum distance to a possible back wall or the like should be 10 cm. The drilling jig has to be used
in case the machine is to be installed on a table provided by the customer (i.e. if the machine has been
delivered without base).
37,9
bolt hole for
32,7
drill sleeve i-8mm (4x)
Rebore Casino table by 10 mm.
Illustr. 3-1
Drilling jig
Note
The width of the drilling jig corresponds to that of the respective cabinet (540 cm), the depth does
not correspond, because this jig is used for various cabinet types. Take the back cabinet edge as
reference edge (i.e. the back edge of the drilling jig corresponds to the back cabinet edge).
© 09 2008 AGI GmbH
540
60,8
200,7
main
supply
bolt hole for
drill sleeve i-5mm (3x)
optional
45M626U1DE-02
I N S P E C T I O N ( D A M A G E S C A U S E D B Y T R A N S P O R T )
186,6
37,1
drop
door
32,2
P O W E R U P
Z_CS_Bohrschablone.eps
3
1 5