Dynaphos Starter SK-200 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Фонарик Dynaphos Starter SK-200. Dynaphos Starter SK-200 8 страниц. Studio flash

Mounting the flash and preparing to work
screw 7.
pic. 1
Mount the flash on a light stand and fix it
19
(see p.
2). Adjust the horizontal angle and secure the handle
18. To take down the protective cap or mounted accessory, hold down the
front fit release button
it forward (pic.1). To mount an accessory, proceed the opposite way as
matching the feathers of the bayonet with the corresponding holes of the
flashe body (pic.2). If the modeling lamp isn't installed in advance, installe
it by using gloves or clean cloth (pic.3). Make sure that the power switch
11
is at position "0" and plug in the power cable into the power sock-
et 13. Set the power switch at position "I" to turn on the flash. To
work with photographic umbrella use the standard 15 cm reflec-
tor and place it with the umbrella outfit matching the flash umbrella
holder
(see the picture on the
3
pic. 2
15
turn the accessory counterclockwise and pull
left). Fix the umbrella through the fixing
Guide
pic. 3
through the screw