Autonics LSE-4A5R2 Руководство - Страница 11
Просмотреть онлайн или скачать pdf Руководство для Датчики безопасности Autonics LSE-4A5R2. Autonics LSE-4A5R2 12 страниц. 2d laser scanners
Также для Autonics LSE-4A5R2: Руководство по эксплуатации (5 страниц)
Печатать страницу▣ Cautions during Use
● Follow instructions in 'Cautions during Use'. Otherwise, it may cause unexpected accidents.
● 24VDC power supply should be insulated and limited voltage/current or Class 2, SELV power supply device.
● After supplying power, the sensor performs self-check for about 10 sec. When self-checking, error occurrence, remote control setting,
and teaching, the laser scanner outputs the same as it sensed obstacle.
● Mutual optical interference between laser scanners and photoelectric sensors may result in malfunction.
● Mutual optical interference between laser scanners may result in malfunction.
● Objects can not be scanned when covering the front cover of the laser scanner.
● When the laser scanner is moved to another position, use it after re-teaching (Teach-in).
● Do not drop the unit. It may cause malfunction.
● Installing the laser scanner in the place where smoke, fog, dust, or corrosion is heavy may result in malfunction.
● When installing the laser scanner outdoors, take protective measures. Otherwise, it may result in product damage.
● Keep away from high voltage lines or power lines to prevent inductive noise. In case of installing power line and input signal line
closely, use line filter or varistor at power line and shield wire at input signal line.
Do not use the laser scanner near the equipment which generates strong magnetic force or high frequency noise.
● Cover with shields, hoods, or etc. to prevent direct incidence of strong light (direct rays of sunlight, incandescent) into the laser
scanner beam spread angle.
● When fastening the laser scanner with the bracket, align with the mark line.
● When mounting the bracket onto an external object, remove the wire fixture so that the wire of the laser scanner is not pressed.
● Fix the laser scanner in position with the fixing screw. Vibration may result in malfunction.
● When IP address of the laser scanner and wireless router is same, the communication does not connected.
Set the wireless network (Wifi) to "Disable" in the network settings of the Windows operating system.
● This unit may be used in the following environments.
① Indoors/Outdoors (in the environment condition rated in 'Specifications')
② Altitude max. 2,000m
③ Pollution degree 2
④ Installation category II
Laser Scanner
D-13