Autonnic A5024 Руководство по эксплуатации и установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и установке для Компас Autonnic A5024. Autonnic A5024 19 страниц. Fluxgate compass

When the A5023-24 is viewed from the front face with the LED facing, then

Switch 1 is on the right and Switch 2 is on the left.

Switch 1:

Switch 2:

must be mounted upright but at any azimuth. Pressing S2 sets the

heading to zero and so can be done when the whole installation is

headed North.

Both together

the auto-calibration process to halt and restores the previously saved

calibration values.

1.4

Indicator light

A blue light indicates three states of the A5023-24.

State 1

State 2

State 3

After the reset command,

uncalibrated and will have a long flash.

Note that the LED can be turned off and on by the DLED command – see section

Start the auto-calibration process

Set reference NORTH heading. The A5024/4

Pressing both together for at least one second causes

Uncalibrated

In the process of calibration continuous

Calibrated

$PATC,IIHDG,0CV<CR><LF>

long flash

short flash

6 of 19

A5023/24

, the compass is