Autoseeker Electronics A680-1 Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для GPS Autoseeker Electronics A680-1. Autoseeker Electronics A680-1 5 страниц. Watch tracker
Печатать страницуType
Command
Set guardian
numbers
Set SOS numbers 12# sos1# sos2
Password
School quiet mode
GPS mode
Call Management
factory settings 0000
Search Location
txt
Search Location
Map
Set of query
Balance of query 36
Track record set
Internet access
point settings
Management
Platform setting
Instruction
11# mobile phone number
# password
13#old password #
new password
14#0
OFF Default
14#1
Open
15#0
OFF
15#1
Open Default
16#0
OFF
16#1
Open Default
21
22
25
24#0
Tracking off
24#60 (Tracking open
24##
Delete
32# Access Point
# User name # password
34#0
OFF
34#1
Open Default
Function Remarks
Set guardian numbers, The initial password is 0000.
Example: You can set 2 SOS numbers :
12#12345678910#12345678911
Example: changed the password to 1234
13#0000#1234
Password: The acquiesced password is 0000.If forget new
password after modifying, just connect computer with USB
cable to check the password.txt file and find it out.
From 8:00-11:30; 14:00-17:30, the tracker refuse all incoming
calls except SOS numbers and the guardian numbers. LCD
displaying
to ensure with quiet.
The device default GPS + LBS dual positioning functions.
When the positioning accuracy is not the case, turn off the
GPS positioning mode can significantly extend the standby
time! and LCD displaying
16#0
Only authorized number to answer calls LCD
displaying
16#1 Allow incoming calls to all numbers
Recover factory setting : 0000
Search for GPS tracker's current location information.
It can also be achieved by dialing the numbers to the GPS
tracker: If dial the numbers and hang up within 5 seconds, the
GPS tracker does not display incoming call, but sends a message
to the caller. If over 5 seconds, the GPS tracker displays
incoming call, then also send the current location to the caller
automatically.
Search for GPS tracker's current location information and reply
website link.
Queries the current setting state of GPS Tracker
GPS tracker card balance inquiry
This's for mainland China only.
24#60 (Default) 60 means 60 Mins (from 1-99 mins).
Turn it on to set time (unit: minute); interval tracking record will
be uploaded to the management platform. The LCD displays
to show tracking record is on. The tracing data
Will be stored into the platform. The historical track can be
viewed on the platform too. To save power,just turn off if
platform connection no longer need.
32#cmnet##
Set the GPS tracker to access the network through cmnet access
point. Usually the user name and password are not needed to fill
and let it blank. For example: China Mobile: cmnet; China
Unicom: uniwap; PCCW : pccw
LCD display
to show the management platform open, the
terminal connecting through the GPRS network, then the
platform can send commands to the GPS tracking device.To
.