HighPoint R1000 Series Руководство по быстрой установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Контроллер HighPoint R1000 Series. HighPoint R1000 Series 9 страниц. 4x m.2 port to pcie 3.0 x8/x16 nvme hba's
Также для HighPoint R1000 Series: Руководство по быстрой установке (8 страниц), Руководство по быстрой установке (10 страниц)

R1104/R1204 Hardware Installation:

Step 1. On the rear of the controller, remove the six screws that secure

the unit's heat sink to the PCB.

Step 2. After removing the screws, carefully remove the heat sink from

the controller card. Carefully turn the heatsink over to view the

thermal pad. The blue film must be removed from the pad before

reinstalling the panel. This film protects the pad from damage and

foreign objects prior to installation, but will also prevent the pad

from transferring heat away from the NVMe SSD's and controller

componentry.