Maiwe MIGE1203 Series Руководство пользователя - Страница 14

Просмотреть онлайн или скачать pdf Руководство пользователя для Сетевое оборудование Maiwe MIGE1203 Series. Maiwe MIGE1203 Series 20 страниц. Industrial gigabit media converter industrial ethernet switch

Печатать страницу

MIGE1203 Series Industrial Gigabit Media Converter/MIGE2205G Series

Industrial Ethernet Switch

The switch must be connected to the protective ground:

Grounding and wiring can effectively suppress the noise impact caused

by electromagnetic interference. The ground connection should be made

before connecting the equipment, from the ground screw to the ground

surface.

3.2. Host Installation

3.2.1. Rail-mounted installation

When taking out the device from the packing box, the rear panel of the

switch should have fixed the connection seat of the DIN rail. If the switch needs

to be installed on the DIN rail, you should check the installation of the DIN rail

before installation.It mainly includes the following two contents:

Whether the DIN rail is firmly fixed and sufficient space on the DIN rail to

install the switch

Whether there is a power supply suitable for switch work on the DIN rail

After selecting the installation location of the switch, follow the steps

below to install the switch on the DIN rail

Insert the upper part of the DIN rail into the slot on the upper part of the

DIN rail connecting seat with the circlip.

Slightly push down on the top panel of the switch and turn the device as

shown in Figure A below

As shown in Figure B below, insert the DIN rail into the DIN rail

connector to confirm that the switch is reliably installed on the DIN rail

3.2.2. Cable connection

After correct installation, you can install and connect the cables, mainly

include the following interface of cable connections.

Business interface

The gigabit port of the terminal equipment provided by the product is a

10BaseT/100BaseTX/1000Base-T Ethernet RJ45 interface. Straight-through

network cable to connect to the terminal device and crossover network cable to

connect to the network device.

- 10 -