AgXcel Muller ISO Быстрая начальная настройка - Страница 3
Просмотреть онлайн или скачать pdf Быстрая начальная настройка для Сельскохозяйственное оборудование AgXcel Muller ISO. AgXcel Muller ISO 17 страниц.
*These settings are adjusted as needed
P: This is a portion of the loop that is proportional to the amount of time the error is present
I: This is the portion of the loop that accumulates previous errors. It is the "memory" of the control loop. For each loop cycle, the
integrator adds the current error to the previous integrator value.
Dead Band: The allowable value that NO controlling/corrections will be made to the control valve. A low number may result in
oscillation around the target rate. High number may result in not achieving the target rate.
Minimum/Maximum Time: Min/ms is the value the output will start from no matter how much correction is needed. Max/ms is
the max value the output will reach once saturation of the output has been reached
WWW.AGXCEL.COM
Quick Start Setup Instructions for Müller RCM ISO -
.
Single Product
Advance Configuration (Features) Continued
•
Press the 3-dot icon to go to the next page of the
Advance Configuration.
Product 1 Master/Dump Valve: No Master/Dump Valve
(When Dump Valve is selected, the valve will remain open
when not applying)
Boost Pump: Unchecked
(Put a checkmark if the system is setup for use of a booster
pump)
Control PWM Base Freq:
GX5 (hydraulic)... 150 Hz
GX2 (electric).......150 Hz
GX40 Synergist....150 Hz
Press the 3-dot icon to go to the next page of the
•
Advance Configuration.
Product 1 Controller Settings*:
P:
GX5 (hydraulic).... 3.0
GX2 (electric)....... 3.0
GX40 Synergist.... 3.0
D:
GX5 (hydraulic)... 0.5
GX2 (electric)....... 0.5
GX40 Synergist.... 0.5
PWM Min:
GX5 (hydraulic)... 10%
GX2 (electric)....... 10%
GX40 Synergist.... 10%
877-218-1981
I:
GX5 (hydraulic).... 3.0
GX2 (electric)....... 3.0
GX40 Synergist.... 3.0
Dead Band:
GX5 (hydraulic)... 3%
GX2 (electric)....... 0.0
GX40 Synergist.... 0.0
PWM Max:
GX5 (hydraulic)... 100%
GX2 (electric)....... 100%
GX40 Synergist.... 100%
Page | 3