IKEA LIVSLAGA Руководство пользователя - Страница 13

Просмотреть онлайн или скачать pdf Руководство пользователя для Варочная панель IKEA LIVSLAGA. IKEA LIVSLAGA 24 страницы. Burner
Также для IKEA LIVSLAGA: Руководство пользователя (40 страниц), Инструкция по сборке Руководство (20 страниц), Руководство пользователя (20 страниц)

Печатать страницу

ENGLISH

This appliance is not connected to a

fume exhaust device. It shall be installed

in accordance with current installation

regulations. Particular attention shall

be given to the relevant requirement

regarding ventilation.

Combustion products are discharged

outdoors through specific hoods or wall

and/or window mounted electrical fans.

Gas connection

This operation must be performed by a

qualified technician or authorised

person.

The gas supply system and installation must

comply with local regulations to the current

relevant gas standard (AS/NZS 5601 current

edition).

You can find specific local regulations for

some countries in the paragraph

"Reference to Local Regulations". If no

information concerning your Country is

given, please ask details to a qualified

technician or authorised person.

The connection of the hob to the gas

pipe network or gas cylinder must be

made by means of a rigid copper or

steel pipe with fittings complying with

local regulations.

Connect elbow (A) or (B) supplied with

to the hob inlet main pipe and interpose

the washer (C) supplied, in compliance

with EN 549.

Washer (D) not supplied with the

product.

WARNING: THIS PRODUCT IS NOT

SUITABLE FOR A FLEXIBLE HOSE

CONNECTION.

After connection to the gas supply, check

for leaks with soapy water. Light up the

burners and turn the knobs from max

position

to minimum position

check flame stability

- For LPG / PROPANE models the

gas supply for the hotplate must be

regulated to a pressure of 2.75kPa.

The gas inlet connection fitting is

½" tapered B.S.P male thread (in

compliance with ISO 7 thread).

- For NG models the gas supply is

connected to a regulator which is

supplied. The inlet connection has ½"

B.S.P male thread. It is essential that the

elbow on the appliance be held firmly

with a spanner. do not over tighten. The

regulated pressure for NG is 1.00kPa.