Avantco 177MX30H Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Смеситель Avantco 177MX30H. Avantco 177MX30H 12 страниц. Gear driven 30 qt. commercial mixer
Печатать страницу
User Manual
Installation
1.
Prior to installation the electrical supply to the unit must be checked to ensure it complies to the electrical
rating of the machine as detailed on the serial plate.
2.
The unit must be positioned to ensure there is sufficient space around the machine to operate the controls
and to raise and lower the mixing bowl. It is essential the unit is placed on a sturdy level surface.
!
WARNING:
The electrical cord on this machine is fitted with a three-pronged grounding plug which must be
connected to a properly grounded electrical outlet. If the outlet is not the proper grounding type,
contact an electrician. DO NOT remove the grounding prong from the plug!!!
Electrical and grounding connections must comply with the applicable portion of the National
Electrical Code and/or other local electrical codes.
Cleaning
!
WARNING: DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE CLEANING
All new mixer bowls and accessories, including whips, beaters, and dough hooks should be properly washed before
use.
Wash with hot water and a mild soap solution and then rinse off with either a mild vinegar or soda solution and then
rinse again with clean water. It is highly recommended this cleaning procedure is followed for bowls and accessories
prior to whipping egg whites or whole eggs. The mixer should be cleaned daily with a clean damp cloth.
If the unit has not been used for some time, it is recommended that the procedure above is followed before mixer use. It
is important that the rear bowl lift guides are greased every three months to prevent corrosion.
NOTE！
The bowl safety guard is easily removable for cleaning by. Please see specific instructions on page 5.
4
www.AvantcoEquipment.com