HIKVISION DS-8100-S Series Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для DVR HIKVISION DS-8100-S Series. HIKVISION DS-8100-S Series 6 страниц.
Также для HIKVISION DS-8100-S Series: Руководство по установке (4 страниц), Краткое руководство по эксплуатации (6 страниц), Руководство по установке (4 страниц), Краткое руководство по эксплуатации (7 страниц)
Печатать страницу
Quick Start Guide
DS-8100-S Series DVR
6. Click the Done button to exit out of Disk Management.
Setting Date & Time
It is extremely important to setup the system date and time to
accurately timestamp recordings and events.
To setup date and time:
1. Enter the Time/Date menu by going to Main Menu>
System Configuration > Time/Date.
2. Enter the correct date and time.
3. Click the Save button to save the setting.
Recording
To setup quick recording schedule:
1. Enter the Quick Schedule Configuration menu by going
to Main Menu > Recording Configuration> Quick
Schedule Configuration.
2. Select the camera to configure from the camera drop
down menu. If all the cameras are to be configured with
the same settings, select All Cameras from the list.
3. Check the Enable checkbox to enable the recording
schedule. If the checkbox is unchecked, the recording
schedule will be disabled.
4. Check the 24/7 checkbox if you would like to record
continuously or on event for 24 hours a day, 7 days a
week. If you wish to schedule different time frames for
Monday through Sunday, leave the 24/7 checkbox
unchecked and skip to step 6.
5. Select Recording Type for 24/7 recording and move on
to step 8. Recording type includes Continuous for
continuous recording or On Event for recording when an
event is triggered (i.e. from detected motion).
6. Select the start and stop time for each day of the week.
The start and stop time are listed using a 24 hr cycle (i.e.
18:00 is equivalent to 6:00pm).
7. Select Recording Type for each day of the week.
Recording type includes Continuous for continuous
recording or On Event for recording when an event is
triggered (i.e. from detected motion) for the selected
time period.
8. Check the Enable Audio checkbox if you would like to
enable audio recording along with the video. Audio can
only be recorded if an amplified audio source is
connected to the DVR.
9. Select the Save button to save the schedule settings and
select Exit to return to the previous menu. Selecting the
Exit button without clicking Save will quit out of the
menu without saving settings.
Note:
On Event recordings are recordings that are
triggered from motion detection and/or from an
external alarm. See Configuring Alarms and
Exceptions in the user manual.
Playback
Playback from Search
1. Enter the Playback menu by going to Main Menu >
Playback.
2