Makita 2-SPEED HAMMER 8401 Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Makita 2-SPEED HAMMER 8401. Makita 2-SPEED HAMMER 8401 12 страниц. 13 mm (112”) 2-speed hammer drill variable speed i reversing
Печатать страницу
CAUTION :
.Pressing excessively on the tool will not speed up the drilling. In fact, this excessive
pressure will only serve t o damage the tip of your bit, decrease the tool performance
and shorten the service life of the tool.
0
There is a tremendous twisting force exerted on the tool/bit a t the time of hole break-
through. Hold the tool firmly and exert care when the bit begins t o break through
the workpiece. Use both hands to help control the tool. Be sure
to
use the side grip
(auxiliary handle) t o maintain proper control.
0
A stuck bit can be removed simply by setting the reversing switch to reverse rotation
in order to back out. However, the tool may back out abruptly i f you do not hold it
firmly.
0
Always secure small workpieces in a vise or similar hold-down device.
*The use of wire brushes and other accessories on this tool may easily cause jamming,
pinching or binding whereby the tool could be twisted unsafely from your hands.
8