Fronius TransSteel 2200 Краткое руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сварочная система Fronius TransSteel 2200. Fronius TransSteel 2200 12 страниц. Mig / tig / mma welder
Печатать страницу
MIG/MAG
35
38
41
www.fronius.com/transsteel
36
39
37
Only
TransSteel
2200 MV
40
/ Perfect Welding
/ Solar Energy / Perfect Charging
TransSteel 2200c
Quick Guide to synergic welding
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided in hard copy and online.
This document does not describe all the functions of the device. For a complete description of the device, refer to the Operating Instructions.
1
Set the synergic welding process
2
Set the filler metal and shielding gas
When setting a welding power parameter, the
remaining parameters are set automatically
MMA welding
TIG welding
1 .
2 .
3 .
The welding power parameters can be adjusted
individually
4
5
Set the welding power
Adjust the parameters for correction
Arc length correction
Sheet thickness
Welding current
Welding voltage
Wire speed
Arc-force dynamic
select desired parameter
select desired parameter
set desired parameter
set desired parameter
42,0426,0263,EN
001-19042017
3
Set the operating mode
2-step mode: short weld seams, tacking work
4-step mode: longer weld seams, high level of
comfort
Special 4-step mode: additional settings for start-
Spot welding: for overlapping sheets / stitch
welding: light-gauge sheet welding and air-gap
bridging
6
Optimise welding results
1. Measure the welding circuit resistance r
2. Set optimal mains fuse protection (FUS parameter in
level 2 of the Setup menu)
The description of the aforementioned measures can be
found in the Operating Instructions of the power source
Operating Instructions:
www.fronius.com/transsteel-manuals