AEG 30" HK854080XB Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Варочная панель AEG 30" HK854080XB. AEG 30" HK854080XB 40 страниц. 30” electric cooktop
Также для AEG 30" HK854080XB: Руководство пользователя (15 страниц), Руководство (7 страниц), Руководство пользователя (20 страниц)

Печатать страницу

4.1 Activating and

deactivating

Touch

for 1 second to activate or

deactivate the hob.

4.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after

you activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• you do not deactivate a cooking zone

or change the heat setting. After

some time

comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting

, 1 - 3

4 - 7

8 - 9

10 - 14

4.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct

heat setting.

The hob deacti-

vates after

6 hours

5 hours

4 hours

1.5 hour

4.4 Activating and

deactivating the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the

sensor field. The indicator comes on.

To activate more outer rings: touch the

same sensor field again. The subsequent

indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

When you activate the zone

but do not activate the outer

ring the light that comes out

from the zone may cover the

outer ring. It does not mean

that the outer ring is

activated. To see if the ring

is activated check the

indicator.

4.5 Automatic Heat Up

Activate this function to get a desired

heat setting in a shorter time. When it is

on, the zone operates on the highest

setting in the beginning and then

continues to cook at the desired heating

setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

(

comes on).

Immediately touch the correct heat

setting. After 3 seconds

To deactivate the function: change the

heat setting.

4.6 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

ENGLISH

comes on.