2N Lift8 Краткое руководство - Страница 12

Просмотреть онлайн или скачать pdf Краткое руководство для Система внутренней связи 2N Lift8. 2N Lift8 14 страниц. Io module
Также для 2N Lift8: Краткое руководство (8 страниц), Краткое руководство (12 страниц), Краткое руководство (13 страниц), Краткое руководство (6 страниц), Краткое руководство (12 страниц), Краткое руководство (17 страниц)

Date and Time Setting

Create (or change) a text file (time.cfg) and put it in the microSD card root directory (like

camera.cfg). Enter UTC (time zone), date and time (1 24.10.2014 15:33:00, e.g.) into the

text file. Insert the microSD card in a turned-off camera module and turn the module on.

Standalone camera module upgrade

Refer to 2N® Lift8 Camera Module at www.2n.cz for the latest firmware

(ln_app_camera.bin). Download the file to a microSD root directory. When you insert the

microSD card, the file (ln_app_camera.bin) will be loaded onto the dataflash (yellow LEDs

flashing) and then the module will get restarted. Upon restart, the new FW will be loaded

to the camera module. The ln_app_camera.bin file will be renamed to

OFF_ln_app_camera.bin.

MicroSD card

Insert the microSD card in the slot. If the card is loaded correctly and the camera module

is configured properly, the orange SD LED will start flashing to indicate that images are

recorded onto the microSD card in the selected intervals. Press REC/STOP to remove the

microSD card and wait until the LED stops flashing.

Mounting Types

See below for the mounting types and necessary components. Install the device on sites

not exposed to water leakage or condensation.

Wall Mounting

Use appropriate wall plugs and screws for mounting (not included in the delivery). Hang

the device using the pre-drilled holes on the device bottom.