Fujitsu N7100 Инструкции по замене и очистке расходных материалов - Страница 16
Просмотреть онлайн или скачать pdf Инструкции по замене и очистке расходных материалов для Принтер Fujitsu N7100. Fujitsu N7100 20 страниц.
Также для Fujitsu N7100: Начало работы (24 страниц)
Печатать страницу
N7100 C
R
ONSUMABLE
EPLACEMENT AND
16
C
I
LEANING
NSTRUCTIONS
C
I
S
LEANING
NSIDE THE
Ultrasonic sensor (x2)
Clean lightly with a soft cloth to wipe their surfaces clean. If you have
trouble wiping them with the cloth, use a cotton swab.
Idler roller (x4)
Gently rotate the idler rollers by hand as you wipe them clean. Take care
not to damage the soft rubber. The idler rollers should be cleaned
carefully and thoroughly, as dirty idler rollers can adversely affect the
paper pickup performance.
Glass (x2)
Clean lightly with a soft cloth to wipe their surfaces clean.
HINT
If the glass is dirty, a vertical line may appear on the scanned image.
Pick roller (x2)
Gently wipe the dirt and dust off from along the slots on the surface of
the roller as you rotate it manually. Take care not to damage the soft
rubber. The pick roller should be cleaned carefully and thoroughly, as a
dirty pick roller can adversely affect the paper pickup performance.
Feed roller (x2) and eject roller (x2)
When cleaning, turn on the power and let the feed rollers and eject
rollers rotate.
1 Connect the power cable, and turn on the scanner.
ATTENTION
The scanner needs to be on only when cleaning the feed rollers and
eject rollers.
(
.)
CANNER
CONT