AEG ABS8181LNC Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Морозильная камера AEG ABS8181LNC. AEG ABS8181LNC 16 страниц.

Печатать страницу

www.aeg.com

Problem

The temperature in the ap-

pliance is too low/too high.

If the advice does not lead

to the desired result, contact

the nearest Authorised

Service Centre.

7.2 Closing the door

1. Clean the door gaskets.

8. INSTALLATION

8.1 Location

Refer to the assembly

instructions for the

installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

8.2 Positioning

Install the appliance in a dry, well

ventilated indoors where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance.

Climate

class

Possible cause

The temperature regulator

is not set correctly.

The food products' tem-

perature is too high.

The door has been

opened often.

The FROSTMATIC function

or COOLMATIC function is

switched on.

There is no cold air circula-

tion in the appliance.

Ambient temperature

+10°C to + 32°C

Solution

Set a higher/lower tempera-

ture.

Let the food products temper-

ature decrease to room tem-

perature before storage.

Open the door only if necessa-

ry.

Refer to "FROSTMATIC func-

tion" or "COOLMATIC func-

tion".

Make sure that there is cold air

circulation in the appliance.

2. If necessary, adjust the door. Refer to

assembly instructions.

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

Climate

Ambient temperature

class

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only

be guaranteed within the

specified temperature

range. If you have any

doubts regarding where to

install the appliance, please

turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.