A-Neuvideo ANI-2PIP-LOGO Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Монитор A-Neuvideo ANI-2PIP-LOGO. A-Neuvideo ANI-2PIP-LOGO 20 страниц. 2x1 hdmi multiviewer
Также для A-Neuvideo ANI-2PIP-LOGO: Руководство по эксплуатации (15 страниц)
Печатать страницу
A
NEUVIDEO
RS-232 & Telnet Commands
COMMAND
DESCRIPTION & PARAMETERS
? 8
HELP 8
GET FW VER 8
SET FACTORY DEFAULT 8
SAVE PRESET N1 8
RECALL PRESET N1 8
SET OUT A ROUTE N1 8
GET OUT A ROUTE 8
SET WINDOW LAYOUT MODE N1 8
GET WINDOW LAYOUT MODE 8
SET OUT A WINDOW PRIORITY N1
GET OUT A WINDOW PRIORITY 8
SET WINDOW SWAP N1 8
GET WINDOW SWAP 8
SET IN AUTO MODE N1 8
GET IN AUTO MODE 8
SET IN N1 EDID N2 8
GET IN N1 EDID 8
DESCRIPTION & PARAMETERS
Show the full command list.
Show the full command list.
Show the unit's current firmware version.
Reset all configurations to the factory defaults.
Save the current configuration as preset N1.
N1 = 1 ~ 4
[Preset number]
Recall the saved configuration from preset N1.
N1 = 1 ~ 4
[Preset number]
Switch to full screen routing mode and show input N1.
N1 = 1 ~ 2
[Input port]
Show the currently set full screen routing source.
Set the windowing mode to N1.
Available values for N1:
1
[PIP mode]
2
[SBS mode]
4
[POP mode]
5
[Full screen routing mode]
Show the currently selected windowing mode.
Select which input window will have top display priority in the dual-windowing modes.
N1 = 1 ~ 2
[Input port]
Show which input window currently has top display priority.
Enable or disable the input window swap function.
Available values for N1:
0
[Off]
1
[On]
Show the current state of the window swap function.
Enable or disable the auto input switching mode.
Available values for N1:
0
[Off]
1
[On]
Show the current state of the auto input mode.
Set the EDID to use with input N1.
N1 = 1 ~ 2
[Input port]
Available values for N2
1
[Internal EDID 1]
2
[Internal EDID 2]
Show the EDID source currently used by input N1.
N1 = 1 ~ 2
[Input port]
6
RS-232 & Telnet Commands