Acano Solution Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Сервер Acano Solution. Acano Solution 17 страниц.

Печатать страницу

2.1 PIN Outs for Console Port

The PIN outs are for the Console port on the front of the Acano Server are:
Connector
Description/Use
1
No connection
2
DTR (connected to pin 7)
3
Transmit data
4
Ground
5
Ground
6
Receive data
7
DSR (connected to pin 2)
8
No connection

2.2 Status Light Descriptions

This section describes the behavior of the Acano Server status lights (LEDs).

2.2.1 Front panel LEDs

There are four LEDs on the front of the Acano Server: OK, Warning, Power Supply A and Power
Supply B. They have the following behavior.
OK
Blue: normal operation
Warning
If on (red), check the cause urgently in the Web Admin Interface Status > General page.
Supply A/B
Blue: power supply is operating normally
Flashing quickly: power supply is present but not functioning (i.e. not plugged in)
Flashing slowly: power supply is not present
Note: If either power supply LED is flashing; check the cause urgently in the Web Admin
Interface Status > General page.

2.2.2 Back panel LEDs

All five Ethernet ports (Admin and A to D) have the same LED behavior:
Left
Green: Link at 10G
Acano solution: Installation Guide 76-1002-04-D
The Acano Server
Page 6