A.H. Systems SAS-512F-4 Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Антенна A.H. Systems SAS-512F-4. A.H. Systems SAS-512F-4 14 страниц. Log periodic antenna
Печатать страницуA.H. Systems SAS-512F-4 Log Periodic Antenna
OPERATING INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
The SAS-512F-4 Log Periodic Antenna is shipped fully assembled. If an
optional Log Periodic Tripod mount (LPM-510) was purchased, that will also be
pre-assembled and mounted to the antenna.
MOUNTING INSTRUCTIONS
The SAS-512F-4 is a lightweight, rear mount Log Periodic Antenna. Attach the
antenna to the azimuth and elevation head (AEH-510) through the screw hole in
the antenna base. The azimuth and elevation head (AEH-510) mounts to the
tripod (ATU-510) top and allows the antennas to be rotated 360 degrees and
tilted between horizontal and vertical polarization. Each tripod leg is
independently adjustable in angle and length to facilitate antenna height setting.
The tripod legs have a rubber tip on one end for indoor or hard surface use, and
a metal spike on the other end for outdoor soft surface (such as dirt) use.
Four extra holes are pre-drilled into the booms (at the approximate CG point) of
the antenna for an optional Log Periodic Mount (LPM-510). This allows an
optional center mount of the antenna where applications require it.
Mount the antenna such that the elements are parallel to the ground for
horizontal polarization testing, or perpendicular to the ground for vertical testing.
The horizontal beamwidth of the log periodic is approximately 45 degrees and it
should be pointed or aimed in the direction that the received signal is coming
from.
A.H. Systems inc. – May 2014
REV C
6