Aqua Optima Oria 2.8L Инструкция по применению - Страница 3
Просмотреть онлайн или скачать pdf Инструкция по применению для Системы фильтрации воды Aqua Optima Oria 2.8L. Aqua Optima Oria 2.8L 4 страницы.
Печатать страницу
READ ALL INSTRUCTIONS BEFORE USE AND
EN
SAVE THEM FOR FUTURE REFERENCE
WARNING
This product is intended to filter tap water only. Do
not put water of unknown quality or that has been
microbiologically contaminated into the product.
BEFORE USING THE FILTER JUG FOR THE FIRST TIME
1. Remove all packaging from the jug.
2. Remove the lid from the jug and wipe it with a clean
damp cloth.
3. Remove the inner vessel and wash it thoroughly.
STICK ON FEET (ORIA JUG)
Inside the jug is a packet of 6 stick on feet which can be
placed into the circles on the base to protect your work
surfaces.
PREPARING THE WATER FILTER CARTRIDGE
1. Remove all packaging from the filter
cartridge. There may be a small
residue of black carbon particles
in the bag or on the surface of the
cartridge; this is normal. These
particles are harmless and are washed
off during the preparation process.
2. Soak the cartridge in a bowl of water
for 5–10 minutes to remove all the air
bubbles.
3. Rinse for 1 minute under a running tap.
4. The filter cartridge is now ready for use.
FITTING THE FILTER INTO THE INNER VESSEL
1. Fit the Aqua Optima filter cartridge
into the underside of the inner
vessel and rotate clockwise to lock
into place. Ensure that it is firmly
secured.
2. Place the inner vessel back into the
filter jug.
3. Refit the lid.
4. Fill the inner vessel with cool water
and let it pass through the filter.
Once it has been filtered, discard
the water. Repeat the procedure
once more.
5. Fill the inner vessel for a third time,
your water filter jug is now ready
for use.
AQUA OPTIMA 30-DAY FILTER CARTRIDGE
To ensure the best performance, the filter cartridge
should be changed after 100 litres, which is
approximately 4 weeks of typical use.
AQUA OPTIMA 60-DAY FILTER CARTRIDGE
To ensure the best performance, the filter cartridge
should be changed after 200 litres, which is
approximately 8 weeks of typical use.
REPLACING THE FILTER CARTRIDGE
• Remove the lid and lift out the inner vessel.
• Hold the inner vessel and rotate the cartridge
anticlockwise to release it.
• Prepare and insert the new cartridge as described
above.
FOR BEST RESULTS
• To prevent the filter from drying out, it should not
be left unused for long periods. If such an extended
period is anticipated (such as a holiday), then it is best
to remove the filter and store it in a sealed plastic
bag. The filter can then simply be prepared as per
the original fitting instructions. Refer to Preparing the
water filter cartridge above.
• Store the filter jug in the refrigerator or in a cool place.
It is important to store the jug out of direct sunlight
and away from heat sources.
• Wash and rinse the inner vessel and jug regularly. The
lid should be wiped clean with a damp cloth.
• Use only cold or room temperature water for filtering.
• Only use mild cleaning agents, never solvents or
corrosive chemicals. Never use abrasive pads on this
product.
• Do not use the filter jug for any other purpose than for
filtering water.
1 Min
1 Min
x2
x2