Aqua Science Fleck 5600 SXT Руководство по установке - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке для Системы фильтрации воды Aqua Science Fleck 5600 SXT. Aqua Science Fleck 5600 SXT 12 страниц. Digital water softener system

Печатать страницу

Fleck 5600 SXT Digital Water Softener System Installation Manual

Water Softener Tank Assembly and Valve Installation (continued)

Water Out

Bypass Valve - Top View

Next install the Bypass Valve into your existing water lines.

Make sure that your "Water In" always goes into the right-

side of the Bypass as if you were looking at the Bypass

from a top view.

2.) Insert the Control Valve into place with the Bypass

and then fasten with the clips. Make sure not to pinch

the O-ring that are on the valve ports. Turn handle so it's

pointing toward bypass.

800-767-8731

Water In

(Connected to your water supply)

1.) Unscrew the clips from the back of the Control Valve

before you move the Control Valve into place with the

Stainless Steel Bypass that you just installed into your

water lines.

3.) Ensure that the measurements match the height of the

valve ports in the back of the Control Valve.

Then plumb to valve.

(Connected to your water supply)