Dell PowerEdge 4x00 Series Руководство по установке - Страница 32

Просмотреть онлайн или скачать pdf Руководство по установке для Сервер Dell PowerEdge 4x00 Series. Dell PowerEdge 4x00 Series 37 страниц. Rack installation guide
Также для Dell PowerEdge 4x00 Series: Руководство по установке (28 страниц), Установка стойки (37 страниц), Руководство пользователя (42 страниц), Установка стойки (34 страниц)

05KCEeb1.fm Page 16 Thursday, September 14, 2000 1:37 PM

5HY ),/( /2&$7,21 5???0XOWL?9?.&(HEIP

1-16

Rack Installation Guide

Slide the unattached end of the cable-management arm into the slotted pocket

made by the formed metal tabs on the side of the cable tray.

Secure the cable-management arm in its slotted pocket with the captive

thumbscrew.

Attach the input/output (I/O) and power cables to their connectors on the back of

the computer.

For details, see your computer's Installation and Troubleshooting Guide and the

User's Guide.

Secure all of the computer cables to the cable-management arm:

Loosen the rack adapter's thumbscrews that secure the front of the com-

puter to the front vertical rail.

Slide the computer forward to the fully extended position.

Route the cables along the cable-management arm, allowing cable slack at

the hinge positions, and secure the cables to the cable-management arm

with the Velcro straps attached to the cable-management arm (see

Figure 1-12).

Slide the computer in and out of the rack to verify that the cables are routed

correctly and do not bind, stretch, or pinch with the movement of the cable-

management arm.

NOTE: As you pull the computer out to its furthest extension, the slide assem-

blies will lock in the extended position. To push the computer back into the rack,

press the green locking latch on the side of the slide to release the locks, and

then slide the computer completely into the rack.

Tighten the rack adapter's thumbscrews that you loosened in step 4.

'(// &21),'(17,$/ 3UHOLPLQDU\