Dell E2211H Руководство пользователя - Страница 32

Просмотреть онлайн или скачать pdf Руководство пользователя для Монитор Dell E2211H. Dell E2211H 34 страницы. User's guide
Также для Dell E2211H: Быстрая настройка (2 страниц), Руководство пользователя (34 страниц)

Печатать страницу

Missing Color

Wrong Color

Image retention from a static

image left on the monitor for a

long period of time

Product Specific Problems

Specific Symptoms

Screen image is too small

Cannot adjust the monitor with

the buttons on the front panel

No Input Signal when user

controls are pressed

The picture does not fill the

entire screen.

NOTE:

When choosing DVI-D mode, the Auto Adjust function will not be available.

Dell™ Soundbar Problems

Common Symptoms

No Sound

Distorted Sound

Unbalanced Sound Output

Low Volume

Downloaded from ManualMonitor.com Manuals

Picture missing color

Perform monitor self-test feature check.

Ensure that the video cable connecting the monitor to the computer is connected

properly and is secure.

Check for bent or broken pins in the video cable connector.

Picture color not good

Change the Color Setting Mode in the Color Settings OSD to Graphics or Video

depending on the application.

Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color

Settings OSD if the Color Management is turned off.

Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.

Run the built-in diagnostics.

Faint shadow from the static

Use the Power Management feature to turn off the monitor at all times when not in use

image displayed appears on

(for more information, see

the screen

Alternatively, use a dynamically changing screensaver.

What You Experience

Image is centered on screen,

Check the Scaling Ratio setting in Image Setting OSD

but does not fill entire viewing

Reset the monitor to Factory Settings.

area

OSD does not appear on the

Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.

screen

No picture, the LED light is

Check the signal source. Ensure the Computer is not in the power saving mode by

moving the mouse or pressing any key on the keyboard.

green. When you press "+", "-"

Check to make sure Video Source to S-Video, Composite or Component is powered and

or "Menu" key, the message

playing video media.

"No S-Video input signal", or

Check whether the signal cable is plugged in properly. Re-plug the signal cable if

"No Composite input signal", or

necessary.

"No Component input signal"

Reset the computer or video player.

appears

The picture cannot fill the

Due to different video formats (aspect ratio) of DVDs, the monitor may display in full

height or width of the screen

screen.

Run the built-in diagnostics.

What You Experience

No power to Soundbar - the

Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if

power indicator is off

the power indicator (Blue LED) on the front of the Soundbar is illuminated.

Confirm that the power cable from the Soundbar is plugged into the adapter.

Soundbar has power - power

Plug the audio line-in cable into the computer's audio out jack.

indicator is on

Set all Windows volume controls to their maximum

Play some audio content on the computer (i.e. audio CD, or MP3).

Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.

Clean and reseat the audio line-in plug.

Test the Soundbar using another audio source (i.e. portable CD player).

Computer's sound card is used

Clear any obstructions between the Soundbar and the user.

as the audio source

Confirm that the audio line-in plug is completely inserted into the jack of the sound card.

Set all Windows volume controls to their midpoints.

Decrease the volume of the audio application.

Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume

setting.

Clean and reseat the audio line-in plug.

Troubleshoot the computer's sound card.

Test the Soundbar using another audio source (i.e. portable CD player).

Other audio source is used

Clear any obstructions between the Soundbar and the user.

Confirm that the audio line-in plug is completely inserted into the jack of the audio

source.

Decrease the volume of the audio source.

Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume

setting.

Clean and reseat the audio line-in plug.

Sound from only one side of

Clear any obstructions between the Soundbar and the user.

Soundbar

Confirm that the audio line-in plug is completely inserted into the jack of the sound card

or audio source.

Set all Windows audio balance controls (L-R) to their midpoints.

Clean and reseat the audio line-in plug.

Troubleshoot the computer's sound card.

Test the Soundbar using another audio source (i.e. portable CD player).

Volume is too low

Clear any obstructions between the Soundbar and the user.

Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume

setting.

Set all Windows volume controls to their maximum.

Increase the volume of the audio application.

Test the Soundbar using another audio source (i.e. portable CD player).

Power Management

Modes).

Possible Solutions