Dell E228WFP Руководство пользователя - Страница 33

Просмотреть онлайн или скачать pdf Руководство пользователя для Монитор Dell E228WFP. Dell E228WFP 38 страниц. Flat panel monitor
Также для Dell E228WFP: Руководство по настройке (2 страниц), Брошюра и технические характеристики (3 страниц), Информационный бюллетень (4 страниц), Руководство пользователя (8 страниц)

Печатать страницу

Back to Contents Page

Solving Problems

Dell™ E228WFP Flat Panel Monitor User's Guide

Troubleshooting Your Monitor

General Problems

Product Specific Problems

Troubleshooting Your Soundbar

CAUTION: Before you begin any of the procedures in this section, follow the

Troubleshooting Your Monitor

Self-Test Feature Check (STFC)

Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly

connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:

1. Turn off both your computer and monitor.

2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog(blue

connector) cables from the back of the computer.

3. Turn on the monitor.

NOTE:The floating 'Dell Self-test Feature Check' dialog box should appear on-screen on a black background if the monitor cannot

sense a video signal and is working correctly. While in self-test mode, the power LED remains green. Also, depending upon the

selected input, one of the dialogs shown below will continuously scroll through the screen.

This box also appears during normal system operation if the video cable becomes disconnected or damaged.

4. Turn off your monitor and reconnect the video cable, then turn on both your computer and the monitor.

If your monitor screen remains blank after you use the previous procedure, check your video controller and computer system; your monitor is functioning

properly.

OSD Warning Messages

One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.

1: Auto Detect (Analog Input)

Cannot Display This Video Mode

Optimum Resolution 1680 x1050 60Hz

safety

instructions.

1: Auto Detect (Digital Input)

Cannot Display This Video Mode

Optimum Resolution 1680 x1050 60Hz