Dell S6000-ON Руководство по установке - Страница 31
Просмотреть онлайн или скачать pdf Руководство по установке для Переключатель Dell S6000-ON. Dell S6000-ON 41 страница. Open networking
Также для Dell S6000-ON: Руководство по началу работы (26 страниц), Руководство по устранению неполадок (29 страниц)
Печатать страницу
•
8 data bits
•
1 stop bit
•
No flow control
Accessing the Console Port
To access the console port, use the following steps.
1
Install the provided RJ-45 connector side of the provided copper cable into the S6000-ON console port.
2
Install the DB-9 female side of the provided copper cable into your PC's serial port (or into other DTE terminal server hardware that
you intend to use).
3
Keep the default terminal settings on the S6000-ON console as follows:
•
115200 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
USB-B console port access
The terminal settings are the same for the USB-B port and the console port:
•
115200 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
When you connect the USB-B port, it becomes the primary connection and, when the system is connected, it sends all messages to the
USB-B port.
Figure 16. USB-B console port connector
1—USB-B Port
Management ports
31